Field Scalpel
The field scalpel has a 2 1/2 inch blade of .125 1084 steel. This one has upgraded buffalo horn handles
Bird and Trout
The bird and trout has a 4 inch blade of NitroV stainless with this example having upgraded curve backed brass 3 (copper) pin bolster with the Tasmanian Blackwood handle.
AH EDC
This every day carry knife (designed for the Africa Hunting forum) has a 3 inch blade of .125 1084 steel. Comes with either standard vertical or a horizontal cross draw sheath. Right or left handed. . This one has buffalo horn handles and horozontal carry sheath but standard sheath also available
Light Hunter
The light hunter has a 3 3/4 inch blade of .125 1084. The top one has canvas olive micarta with brown linen micarta handles with the lower one being my own personal knife having end grain olivewood with ebony .
Classic Mini Skinner
The Classic mini skinner with its 3 1/4 inch blade of 1/8 1084 is suitable for all small game from goats to deer and makes for a compact carry knife that is still able to perform the big tasks of field dressing and skinning you game animals.
The top one has curved paper micarta bolster with NZ Matai handles and a lanyard tube while the lower one has olivewood handles. Comes standard with sheath. Upgrades available.
Chamois Hunter
The Chamois Hunter is a handy size for an every day carry Hunters knife. The 3 1/2 inch blade of 1084 carbon steel is ideal for this task and any related hunting chores.
This example has brass bolster with orange G10 spacer and pins in the Rosewood handle
The Tahr Hunter
The Tahr hunter has a 3 3/4 in blade of .156 1095. This one has an inch of jimping ahead of the handle with lanyard tube in the scolloped OD canvas micarta over orange G10 liners and comes in a closed top sheath.
The 4x4 Hunter
This knife is 8 inches overall with an 4 inch blade of 1/8 1084 and 4 inch handle and was designed as an all round knife for hunting and edc chores for someone who was in and out of a vehicle as part of work schedule.
This example is upgraded with spalted buckeye over the bronze curve backed bolster on a stone washed blade in an initialed and border stamped sheath with attached honing steel.
Hunter Skinner
The hunter skinner is an all purpose hunters knife with a 4 1/4 inch semi skinner blade of .125 1084 steel.
This one has a dark jarah handle.
Sheath upgrades
Closed top sheath
The closed top sheath with leading edge closure is to prevent the rifle stock rubbing against the more common center of the sheath face snap closure. The Sam Browne stud is placed to be out of the way yet still accessible for knife removal and return while preventing loss while hunting. Offered on Tahr Hunter and larger models.
A knife steel
With a number of requests for having a steel with the knife I can now offer a 6 1/2 in steel in a sheath attached to the main sheath sewn in as part of the welt. for the smaller knives the steel is scaled to fit proportionally for length. This is one shown with the hunter Skinner for how they are presented.
Sheath decorating.
The sheath will have my 3 dot makers mark on the upper face and can have additional decorative border stamping and initials down the face as well.
Mini Bullnose skinner
The mini bullnose skinner has a 4 inch bullnosed blade of 1/8 1084 with this one upgraded with Tasmanian Blackwood handles over the buffalo horn handles.
Skinning knife
This skinner will serve as an all round knife for the hunter with more emphasis on the skinning style. A 4 inch blade of .125 1084. Standard acacia handles on this one.
Thumb rest skinner
The thumbrest skinner is for those who like to have support for the thumb along the blade spine. A 4 inch skinner blade of .125 1084 .
This one is upgraded with buffao horn bolsters to the acacia handles
General purpose knife
The general purpose knife will cover a great many applications from EDC to dressing out a game animal to boning it out afterwards with its 5 in blade. This one has brass bolsters and buffalo horn upgrades
Professional Hunter EDC
The PH EDC is a knife designed to take care of almost any task a hunter may have in and on return from the field. A 4 3/4 x 1 3/16 blade of 5/32 1075 carbin steel
. This pair has buffalo horn curve backed bolsters with spalted eucalyptus handle upgrades.
Bullnose Skinner
The bullnosed skinner is for those who like the full sized skinning knife with its 4 1/2 inch blade of 1/8 1084. This one upgraded with Tasmanian Blackwood handles over the stainless bolster with buffalko horn and stainless spacers
Safari knife
The safari knife has a 4 1/4 in blade of .156 1095 with either a saber or flat grind and is the perfect knife to accompany you on a safari or hunt where you may want or need to use it for general purpose use as well as the hunting needs.
The buffalo Skinner
This knife has a 4 1/2 in blade of .170 1075 steel in a vertiacl carry sheath.
Upgrades include flat or curved backed bolsters and various handle options.
The Old Western Hunter
The Od Western is a compact version of the Buffalo Skinner. A 4 1/4 inch blade of 1095 with this one having upgraded 3 pin curve backed buffalo horn bolsters with Eucayptus handles
Wapiti Hunter butcher
The Wapiti hunter butcher knife as a 5 inch blade of .170 1075. This one has scolloped OD canvas micarta over orange liners in edge stamped and initialled hot waxed sheath.
Heavy Hunter
The Heavy Hunter has a 5 inch blade of .170/4.3mm in either 1075 carbon or NitroV Stainless. This knife will handle the heaviest hunting chores but still retains the dexterity for the finer work. Various handle upgrade options available with pricing noted for plain grained wood. The knife shown has exhibition grade Walnut over CB buffalo horn bolsters on carbon steel blade
For the pig hunter who likes to get in close and finish the hunt with a knife this is the knife for you. A 6 inch blade of .170 1075 high carbon steel, saber ground with relieved top edge for easy and deep penetration, this is a strong blade that will take the punishment this type of hunting often brings with it. Plenty of finger cover to stop any forward movment of the hand during engagment. Acacia wood handles as standard. This one has SS bolsters with black G10 and nickle silver spacers under the ebony handle.
Field Boning knives
The field boning knife if designed for use in the field where the animal is on the ground rather than hanging which the professional boning knfe is more suited to. below).
The boning knife has both styles of handle available and has a 4 inch blade of .125 1084 steel
The top knife has a Rimu and buffalo horn handle and the bottom one has blackwood and buffalo horn.
Professional Boning knife
The professional boning knife has a 6 inch blade of 1/8 1075 carbon steel and is ideal for boning animals that are hanging as is usual in a butcher shop or when animals are taken from the field to be broken down in an area with hanging capabilities. Standard with Acacia or Eucalyptus. This one has Swamp Kauri.
Butchers knife
The butchers knife is indispensible for processing the animals during the butchering process of slicing the large muscle groups into steaks etc. Available in 9 to 12 inch blades of 1/8 1084 carbon steel. This one has a 9 1/2 inch blade with turtle shell acrylic handle.
The Cimeter
For the larger animal processing the cimeter with its 12 1/2 inch x 1/8 1075 HC blade makes easy work of slicing the large muscle groups into steaks etc. Often called a steaking or butchering knife, they can be ordered with blade lengths 9 inch through to the max 12 1/2 inch shown here. This one has a handle upgrade with quilted macrocarpa over a buffalo horn bolster
The Lion Knife
This is the lion knife of Harry Wollhurter who used his to kill a lion that attacked him on his horse. The lion bit into his shoulder and subsequently dragged him for 60 yards before Harry was able to reach for his knife to kill the lion. Acacia wood as standard with upgrades offered for this knife. Harrys amazing story of this dramatic event can be read here https://www.africahunting.com/threads/the-lion-knife.28385/
Khukuri EDC
A very versatile historic design accross a widerange of every day uses. This one has a forge finish on the 1075 HC blade with rosewood over brass. Standard is with plain blackwood or eucalyptus and the brass bolster without lanyard tube in unadorned (crossdraw sheath. Upgrade wood options available
Share this page
